10 GHz Flexible High-Power RF Coaxial Cable – CFP1200M

High-Power 10 GHz Flexible Cable for Efficient RF Energy Transfer

RF engineers can specify the CFP1200M RF coaxial cable for power amplifiers requiring documented performance to 10 GHz. Within the CFP1200M raw coaxial cable configuration, the CFP range uses a larger conductive cross-section to prioritize RF power transfer in flexible assemblies rather than minimum cable diameter. Quantitative comparison of the CFP1200M coaxial cable with other High-Power Flexible RF Cables models should be based on the endpoint loss, power, conductor, and mechanical data below.

Power-Focused Cable Dimensions

The mechanical specification combines a 12.00 mm profile with a 60.00 mm minimum static radius and 120.00 mm minimum dynamic bend radius and qualified operation from -55 to +200 °C. For the CFP1200M raw coaxial cable, the FEP jacket must be considered in environmental, material-compatibility, and installation assessments. The substantial 12.00 mm envelope of the CFP1200M RF cable must be incorporated early in the mechanical layout and connector-transition design. Compliance with these constraints helps protect impedance continuity and repeatability at the cable-to-connector transition associated with the CFP1200M RF coaxial cable.

Loss, Power and Propagation Snapshot

Endpoint performance at 10 GHz is specified as 0.452 dB/m attenuation with 0.955 kW power handling. The transmission line incorporates a 3.50 mm silver plated copper (stranded) center conductor, while the specified velocity of propagation is 76%. For the CFP1200M RF cable, the 76% propagation value provides the basis for estimating electrical delay and timing skew over the required assembly length. Together, these values support link-loss, electrical-delay, and power-margin calculations for the CFP1200M RF coaxial cable at the intended operating frequency.

RF Power Paths That Justify the Larger Format

System architects may consider the CFP1200M coaxial cable for industrial RF equipment and high-energy test benches when the specified frequency, loss, power, and bend limits satisfy the design margin. For the CFP1200M coaxial cable, its product-level parameters provide a practical basis for cable selection, assembly design, and technical verification. When alternatives to the CFP1200M raw coaxial cable are required, additional construction and performance options are available in the Flexible Coaxial Cables portfolio.

Mechanc Shanghai Information Technology Co., Ltd. documents the CFP1200M RF coaxial cable with product-specific parameters so that RF engineers can evaluate the interconnect against system bandwidth, loss budget, power, thermal, and packaging requirements. Within the product portfolio, this configuration is designated as the CFP1200M raw coax.