Market Focus
Connected & Autonomous Vehicles
A modern vehicle is a moving RF platform. Radar at 77 GHz, C-V2X, cellular, GNSS and a growing sensor suite all share one body shell and one very cost-sensitive bill of material. Mechanc supplies the precision interfaces that automotive radar development and validation depend on.
76–81 GHz
Automotive Radar Band
DC–110 GHz
Test Coverage
-40° to +125°
Under-Bonnet Range
≤1.15
Typical VSWR
RF Performance
Precision for 77 GHz and Beyond
Automotive radar development runs at frequencies where connector choice is no longer a detail. Our 1.85mm and 1.0mm precision series cover the full 76–81 GHz allocation with the margin a validation bench needs, and the phase stability that repeatable measurement demands.
76–81 GHz
Radar Allocation
1.0mm and 1.85mm precision series
DC–110 GHz
Test Coverage
1.0mm connectors and CFT cable
±3°
Phase Stability
Across the flexure range
-40° to +125°
Temperature Range
Under-bonnet and cabin zones
≤1.15
Typical VSWR
Precision series in band
5,000+
Mating Cycles
Validation bench duty
Automotive Applications
Where Our Products Are Deployed
Automotive Radar
Automotive Radar Validation
Precision 1.0mm and 1.85mm interfaces for characterising long- and short-range radar modules across the full 76 to 81 GHz allocation.
1.0mm 110 GHz
76–81 GHz
Phase-Stable
ADAS Testing
ADAS Testing Systems
Over-the-air test chambers and target simulators, where the cable between the instrument and the horn has to stay calibrated through thousands of scenario runs.
OTA Chamber
Target Sim
VNA Grade
V2X Connectivity
C-V2X & Telematics Interfaces
Sub-6 GHz interfaces for vehicle-to-everything radios, telematics control units and the roadside infrastructure they talk to.
C-V2X
Sub-6 GHz
SMA
Antenna Modules
Roof Antenna Module Feeds
Multi-band feeds inside shark-fin modules, where GNSS, cellular and V2X share one housing and must not interfere with one another.
Multi-Band
Isolation
Compact
Recommended for Automotive
Products for This Market
RF Connectors
1.0mm Connectors
1.0mm Connectors from Mechanc support precision millimeter-wave test systems up to 110 GHz, reaching W-band for 77–81 GHz radar evaluation, 6G research and frequency-extender modules. The 50-ohm range…
Freq: DC–110 GHzVSWR: ≤1.3Parts: 7
Browse 1.0mm Connectors RF Connectors
1.85mm Connectors
1.85mm Connectors from Mechanc operate up to 67 GHz, covering V-band applications such as broadband network analysis, microwave links and high-frequency measurement fixtures. Male and female 50-ohm interfaces…
Freq: DC–67 GHzParts: 38
Browse 1.85mm Connectors RF Connectors
SMA Connectors
SMA Connectors from Mechanc are versatile threaded 50-ohm interfaces used in telecom radios, GPS test setups, RF amplifiers and precision cable assemblies. Standard listed designs reach 18 GHz…
Freq: DC–18 GHzParts: 115
Browse SMA Connectors Coaxial Cables
Phase-Stable Precision Test Cables
Phase-Stable Precision Test Cables from Mechanc suit VNA measurements, calibration workflows, antenna characterization, and multiport RF testing where test leads move between measurements. They help engineers obtain more…
Freq: DC–110 GHzParts: 8
Browse Phase-Stable Precision Test Cables RF Cable Assemblies
Phase-Stable Precision Test RF Cable Assemblies – PC Series
Phase-Stable Precision Test RF Cable Assemblies – PC Series from Mechanc are designed for high-accuracy test and measurement environments where repeatable electrical performance is essential. Covering frequencies up…
Freq: DC–110 GHzVSWR: ≤1.1Parts: 21
Browse Phase-Stable Precision Test RF Cable Assemblies – PC Series RF Adapters
SMA Adapters
SMA RF adapters from Mechanc are industry-standard coaxial solutions rated up to 18 GHz. Known for their versatility and rugged threaded coupling, SMA adapters are the most widely…
Freq: DC–27 GHzParts: 31
Browse SMA Adapters Selected Products
Specified for Automotive Programmes
A hand-picked shortlist rather than the whole catalogue — the interfaces most often specified on radar development and validation benches. Browse the full families above, or send us the programme.
-
1.85mm Male to 1.85mm Male Phase Stable Precision Test RF Cable Assembly – Use CFT240P Coax
$20.00 Add to cartQuick View -
1.0mm Female 4-Hole Flange Mount RF Connector – Field Replaceable, 6.35mm Hole Spacing, 0.23mm Pin Diameter
$126.00 Add to cartQuick View -
1.85mm Female 4-Hole Flange Mount RF Connector – Field Replaceable, 8.64mm Hole Spacing, 0.23mm Pin Diameter
Read moreQuick View -
SMA Female 4-Hole Flange Mount RF Connector – Field Replaceable, 8.64mm Hole Spacing, 0.23mm Pin Diameter
$22.00 Add to cartQuick View
Automotive Engineering Support
Ready to Specify Your RF Interconnects?
Our engineering team supports automotive radar and ADAS programmes with precision interconnect, phase-stable test assemblies and validation support.