6 GHz Flexible High-Power RF Coaxial Cable – CFP1500M

Large-Diameter 6 GHz Flexible Cable for High-Power RF Transmission

With an upper operating frequency of 6 GHz, the CFP1500M RF coaxial cable is intended for industrial RF equipment where predictable interconnect behavior is required. Within the CFP1500M raw coaxial cable configuration, the CFP range uses a larger conductive cross-section to prioritize RF power transfer in flexible assemblies rather than minimum cable diameter. Quantitative comparison of the CFP1500M coaxial cable with other High-Power Flexible RF Cables models should be based on the endpoint loss, power, conductor, and mechanical data below.

RF Performance at the Band Edge

At full rated bandwidth, the cable exhibits a specified attenuation of 0.271 dB/m and supports 1.684 kW of RF power. Its center conductor is silver plated copper (stranded) with a diameter of 4.40 mm; propagation velocity is specified at 76%. For the CFP1500M RF cable, the 76% propagation value provides the basis for estimating electrical delay and timing skew over the required assembly length. Together, these values support link-loss, electrical-delay, and power-margin calculations for the CFP1500M RF coaxial cable at the intended operating frequency.

High-Energy Installations for This Cable

Its defined operating envelope supports technical assessment for high-energy test benches and RF transmit chains without extrapolating from family-level data. For the CFP1500M coaxial cable, the result is a product-specific RF interconnect option supported by the electrical and mechanical data required for design review. When alternatives to the CFP1500M raw coaxial cable are required, additional construction and performance options are available in the Flexible Coaxial Cables portfolio.

Installation Space for a Substantial Cable

The 14.70 mm outside diameter requires a minimum static bend radius of 74.00 mm and 147.00 mm minimum dynamic bend radius, with operation specified across -55 to +200 °C. For the CFP1500M raw coaxial cable, the FEP jacket must be considered in environmental, material-compatibility, and installation assessments. The substantial 14.70 mm envelope of the CFP1500M RF cable must be incorporated early in the mechanical layout and connector-transition design. Compliance with these constraints helps protect impedance continuity and repeatability at the cable-to-connector transition associated with the CFP1500M RF coaxial cable.

Mechanc Shanghai Information Technology Co., Ltd. documents the CFP1500M RF coaxial cable with product-specific parameters so that RF engineers can evaluate the interconnect against system bandwidth, loss budget, power, thermal, and packaging requirements. Within the product portfolio, this configuration is designated as the CFP1500M raw coax.