110 GHz Flexible Low-Price RF Coaxial Cable – CFR160U

Economical 110 GHz Flexible Cable for Millimeter-Wave Integration

Developed for production test fixtures, the CFR160U RF coaxial cable offers a defined electrical bandwidth of up to 110 GHz. Within the CFR160U raw coaxial cable configuration, the CFR concept targets economical broadband integration, giving production engineers a defined performance baseline for volume RF hardware. Quantitative comparison of the CFR160U coaxial cable with other Cost-Efficient Flexible Coaxial Cables models should be based on the endpoint loss, power, conductor, and mechanical data below.

Transmission Data for System Modelling

The band-edge specification at 110 GHz defines 16.984 dB/m attenuation together with 0.002 kW power capacity. The conductor system uses silver plated copper at 0.29 mm diameter and provides a specified velocity of propagation of 70%. For the CFR160U RF cable, the 70% propagation value provides the basis for estimating electrical delay and timing skew over the required assembly length. Together, these values support link-loss, electrical-delay, and power-margin calculations for the CFR160U RF coaxial cable at the intended operating frequency.

Practical Bend Limits for OEM Hardware

For routing and packaging, the relevant limits are 1.45 mm outside diameter, 10.00 mm static bend radius and 15.00 mm minimum dynamic bend radius, and -55 to +165 °C operating temperature. For the CFR160U raw coaxial cable, the FEP jacket must be considered in environmental, material-compatibility, and installation assessments. The compact 1.45 mm profile of the CFR160U RF cable facilitates constrained routing without relaxing the specified bend limits. Compliance with these constraints helps protect impedance continuity and repeatability at the cable-to-connector transition associated with the CFR160U RF coaxial cable.

Production Designs Seeking Cost and Bandwidth Balance

These characteristics support the use of the CFR160U coaxial cable in general microwave routing and OEM RF modules, provided the final assembly design respects the stated bend and power limits. For the CFR160U coaxial cable, accordingly, the cable can be evaluated at component, assembly, and system level using traceable product-specific parameters. When alternatives to the CFR160U raw coaxial cable are required, additional construction and performance options are available in the Flexible Coaxial Cables portfolio.

Mechanc Shanghai Information Technology Co., Ltd. documents the CFR160U RF coaxial cable with product-specific parameters so that RF engineers can evaluate the interconnect against system bandwidth, loss budget, power, thermal, and packaging requirements. Within the product portfolio, this configuration is designated as the CFR160U raw coax.