40 GHz Semi-Rigid Low-Price RF Coaxial Cable – CRE086UDS

Wideband 40 GHz Semi-Rigid Cable for Affordable High-Frequency Routing

Designed for filter and amplifier interconnects, the CRE086UDS RF coaxial cable combines a 40 GHz upper-frequency limit with a controlled cable geometry. Within the CRE086UDS raw coaxial cable configuration, the CRE family provides an economical semi-rigid format for fixed, repeatable paths inside filters, amplifiers and integrated microwave housings. Quantitative comparison of the CRE086UDS coaxial cable with other Cost-Efficient Semi-Rigid Coaxial Cables models should be based on the endpoint loss, power, conductor, and mechanical data below.

Wideband Routing in Compact Housings

Mechanical integration is governed by a 2.18 mm cable diameter, a 10.00 mm minimum static bend radius, and a temperature range of -55 to +125 °C. During installation of the CRE086UDS raw coaxial cable, routing should remain within the specified bend geometry throughout forming, connectorization, and installation. The compact 2.18 mm profile of the CRE086UDS RF cable facilitates constrained routing without relaxing the specified bend limits. Compliance with these constraints helps protect impedance continuity and repeatability at the cable-to-connector transition associated with the CRE086UDS RF coaxial cable.

Design Values at the Operating Limit

The maximum-frequency operating point is characterized by 4.979 dB/m loss and 0.008 kW power capability at 40 GHz. The transmission line incorporates a 0.51 mm silver plated copper center conductor, while the specified velocity of propagation is 70%. For the CRE086UDS RF cable, the 70% propagation value provides the basis for estimating electrical delay and timing skew over the required assembly length. Together, these values support link-loss, electrical-delay, and power-margin calculations for the CRE086UDS RF coaxial cable at the intended operating frequency.

Affordable Broadband Routes Through 40 GHz

The documented performance envelope is relevant to OEM radio hardware and repeatable chassis layouts, where cable loss and routing geometry must be evaluated together. For the CRE086UDS coaxial cable, this documented specification set enables disciplined comparison against alternative cable diameters and performance classes. When alternatives to the CRE086UDS raw coaxial cable are required, additional construction and performance options are available in the Semi-Rigid Coaxial Cables portfolio.

Mechanc Shanghai Information Technology Co., Ltd. documents the CRE086UDS RF coaxial cable with product-specific parameters so that RF engineers can evaluate the interconnect against system bandwidth, loss budget, power, thermal, and packaging requirements. Within the product portfolio, this configuration is designated as the CRE086UDS raw coax.